Changsha Gulai Building Materials Co

Product name: Ceramic tile adhesive (strong type for vitrified tiles)
Product specifications:
Package,
1. Main product performance:
Tile, marble and insulation board adhesive produced by our factory The binder is a viscose powder that combines organic and inorganic materials and is formulated with polymer binders, fine aggregates and special additives. Its main properties are as follows:
, this product can be applied in thin layers, is green and environmentally friendly, has high bonding strength, low shrinkage
, good impermeability, no hollowing, no cracking, and good water retention. It has good freeze-thaw resistance
, the tiles and substrate do not need to be soaked and pre-wetted, the construction is fast, and the safety performance is good
It can overcome the difficulty of pasting from the bottom and positioning large-scale tiles.
2. Scope of application:
This product is used for pasting of tiles and insulation boards in various exterior wall insulation systems
This product is used for interior and exterior walls, kitchens, bathrooms, floors, Paste of tiles and marble for pools, landscaping.
3. Construction method:
The base layer must be smooth, clean, free of oil and other loose materials
Add about 100 kg of water according to the weight of this product, stir with a machine, wait for 10 minutes, and then let it sit for 10 minutes. , stir for another minute. When stirring manually,
add % of water and then pour in the dry binder powder.
Use a special zigzag trowel to evenly apply the glue on the back or base surface of the ceramic tile and comb it into stripes, quickly stick the ceramic tile on it and gently rotate it in by hand. The glue thickness is between
and thin polystyrene boards can be pasted using the point frame method or the strip frame method. The thickness of the glue for smearing the insulation board is , and the glued area is not less than % of the board surface.
For the pasting of exterior wall insulation boards and tiles, please follow the "Technical Regulations for Exterior Wall Insulation Engineering"
The adhesive prepared by adding water should be used up within hours, and the temperature should be lower than that of rain and snow. There can be no construction during the day. The dosage for bonding ceramic tiles is about 1.0 kg of dry powder per square meter.
5. Technical indicators:
All indicators of this product have passed the national inspection and implemented standards
6. Packaging and storage:
This product is packed in laminated woven bags. , This product is non-toxic, non-corrosive, non-flammable, and has a shelf life of half a year. If it has not agglomerated after the expiration date, it can be used again
This product should be protected from rain, moisture, and exposure to the sun, and should be stored in a ventilated and dry place.